Register today to learn how to achieve lower turndown and reduce maintenance costs with GE’s latest flexibility solution—a variant of the Dry Low NOx (DLN) 2.6+ combustion system that adds Axial Fuel Staging (AFS) technology for further turndown capability.
Today’s peak generation environment and supply chain disruptions are making it harder than ever to keep your HRSG running reliably, efficiently, and affordably. What can you do to mitigate these challenges today and tomorrow?
Higher efficiency leads to lower costs. Learn how our aeroderivative turbines offer many advantages over a reciprocal engine, such as reliability and savings instead of maintenance and downtime.
Want to learn more about how one company was able to expand its hydrogen capabilities? Join us for our latest webinar featuring Dr. Jeffrey Goldmeer and special guests from Long Ridge Energy.
Learn how the generator “bubble” from the early ‘90s and the projected power demands of the future are making planning ahead more important than ever, especially when it comes to your generator maintenance.
Join our webinar and Q&A hosted by our FieldCore CEO Amir Hafzalla where we’ll discuss lessons learned, season highlights and new innovative technologies.
As a plant manager, can you continue to reduce emissions and maintain profitability and reliability? Join our webinar with Jay Bryant to see how you can get the most out of your 7E.
Our scalable, site-ready turbines can address energy gaps and yield huge value for municipalities and co-ops. Learn how GE’s gas power technology solutions can benefit smaller power producers.
Operators and plant managers are experiencing rapid change as the evolving energy landscape impacts their power plants' operating profiles. The ability to adapt and be flexible is key to remaining relevant.
Or start with a popular search:
These days, we're all trying to do more with less, but GE can help. Our upgrades and modernizations can help you get more from your existing assets. Discover the possibilities with our interactive upgrades selector.
Register today to learn how to achieve lower turndown and reduce maintenance costs with GE’s latest flexibility solution—a variant of the Dry Low NOx (DLN) 2.6+ combustion system that adds Axial Fuel Staging (AFS) technology for further turndown capability.
Download the latest GE Gas Power catalog to explore our latest products and services, and discover our extensive experience across a broad spectrum of applications and customers.
See how GE Gas Power is helping to build a world that works.
Listen as Dr. Jeffrey Goldmeer and Brian Gutknecht set the stage for the exciting conversations to come in this season. With topics ranging from transportation and buildings to agriculture and education, there are conversations in this next season that you don't want to miss!
Formerly known as the Frame 9E, GE Gas Power’s 9E gas turbine can help decrease costs and increase revenue for your plant.
From the desert to the tropics to the arctic, the rugged 9E.03 heavy-duty gas turbine provides essential power and performs in a vast number of duty cycles and applications. The 9E.04 gas turbine provides increased power and performance while maintaining the simplicity and operational strengths of the 9E.03.
order to operation demonstrated in fast track SC projects
The 9E is a robust, proven platform that helps deliver high availability, reliability, and durability while lowering the overall cost-per-kilowatt.
9E gas turbines can use more than 52 types of fuel— almost the entire fuel spectrum—and can even switch fuels while running under full load. Our 9E turbines operate on fuels with contaminants, natural gas, light and heavy distillate oil, naphtha, crude, residual oil, syngas, and steel mill/blast furnace gases.
With order to simple-cycle operation demonstrated in as few as six months, and fast-start and load capabilities, the 9E gas turbine has quick installation and operational flexibility.
The 9E.04 gas turbine has multiple features that help reduce fuel costs and increase revenue, such as a 145 MW output and 37% simple-cycle efficiency.
The 9E gas turbine utilizes proven E- and F-class materials, fired at lower E-class temperatures for hot gas path, with cooling and sealing improvements, improved clearances and improved work splits between stages.
It’s a strong performer in a variety of scenarios, including simple-cycle, combined-cycle, and industrial CHP and mechanical drive applications in a broad range of industries, including electrical utilities/independent power producers, industrial oil and gas refineries, IWPP, aluminum industry for smelting, steel mills, and LNG.
The 9E gas turbine boasts Dry Low NOx (DLN) combustion with 5ppm NOx* and 25 ppm CO with around 30% Modified Wobbe Index (MWI) flexibility, and emissions standards that help meet World Bank requirements, including dual-fuel heavy fuel oil plants.
The 9E.04 gas turbine features a new 4-stage turbine module that fits within the same footprint as an already installed 9E gas turbine unit. Additionally, it has a 17-stage compressor with corrosion-resistant material, coatings, and inner barrel brush seals that can enhance compressor durability. Its compact footprint helps it create an easy incremental power addition when phased capacity expansion is required.
*Assumes ultra-low NOx option is chosen
Get an inside look at the 9E gas turbine’s product specifications
9E series gas turbines can run on 52 types of fuel.
NOTE: All ratings are based on ISO conditions and natural gas fuel. Actual performance will vary with project-specific conditions and fuel.
West Africa Energy—becoming Senegal’s biggest plant
Wuhan Iron and Steel grows its operations—responsibly
Helping mitigate shifting dynamics in Japan
West Africa Energy—becoming Senegal’s biggest plant
Wuhan Iron and Steel grows its operations—responsibly
Helping mitigate shifting dynamics in Japan
Senegal is in need of the right gas-power technology to grow its renewables. See how GE’s advanced 9E gas turbines became the core of West Africa Energy’s combined-cycle plant. The 300-MW power plant will soon be the country’s largest—expected to generate nearly 25% of nationally consumed power.
of projected total plant power
"We are pleased to collaborate with GE to deliver reliable and efficient gas turbines to Senegal, aligning with our strategy of gas to power. This project will go a long way in reducing the cost of electricity in the country.”
CEO of West African Energy
In 2007, the Chinese company built the world’s largest blast furnace gas power plant, reusing the mill’s own blast furnace and coke oven waste gases to fuel two GE 9E gas turbines. The Wuhan plant produces 260 tons of steam per hour for steel production and generates 2.4 billion kWh of electricity, with an annual output of 1 TWh. Utilizing waste gas provides a number of benefits, and the mill also saves a great deal of money by generating 164 MW of its own electricity.
"One of the greatest challenges to the steel industry around the world is effectively addressing increased emissions regulations while controlling spiraling costs. This milestone project with Wuhan Iron and Steel will allow BFG flares to be captured with higher efficiency and lower emissions to recycle energy back into the plant."
With nuclear power generation cut almost entirely, Japan has been experiencing difficulty in electricity shortages, especially during peak summer months. Tokyo Electric Power Company (TEPCO) was seeking to upgrade Block 1 of their Futtsu Thermal Power Station. The goal is to boost output and enhance heat rate, all while continuing to use existing steam turbines and generators.
In operation for three decades, the six older 9E gas turbines at Futtsu Block 1 are well-suited for GE’s 9E.04 flange-to-flange solution. This consists of new gas turbine components and a step from three- to four-stage, which increases hot gas components from nine to 12.
GE’s Gas Power services team stands ready to collaborate with you in providing solutions that drive your competitiveness, profitability, and productive outcomes. For every customer need, GE is ready to help with the right service solution and product offerings.
Don’t see what you need? Contact us
Our technologies boost reliability and flexibility, reduce the environmental footprint and cut cost of production by increasing efficiency, and the intervals between inspections.
Where can our upgrades take you? Explore a world of outcomes, categorized by customer need.
Our repairs solutions are cost-effective, properly scoped to your needs and can reduce your downtime. Our vision is to support one of the world’s best running fleet.
Reliable plant operations depend on access to flexible parts service. Our global distribution centers are linked to regional supply chains, meaning you’ve got access to the highest-quality component inventory.
By partnering with us for a long-term service agreement, you’ll be able to realize the full potential of your gas plant assets while balancing performance and risk.
Whether you're generating power for entire cities, electrifying your own operations, or are facing an emergency electricity shortage and need power fast, we can act as a versatile gas turbine supplier, ready to quickly provide a range of solutions.
GE’s 9HA high efficiency, air-cooled gas turbine is one of the industry leaders among H-class offerings, and now the 9HA gas turbine is at the heart of the world's most efficient combined-cycle power plant.
9HA gas turbines are 50% hydrogen (H2) capable with a technology pathway to 100%
With over 450 units deployed to more than 40 countries, GE has the largest operating and most experienced OEM F-class fleet in the world. Our 9F gas turbine delivers consistent performance and accommodates a diverse range of fuels, making it great for a variety of combined cycle and CHP applications.
9F series turbines are GE’s most advanced F-class technology for 50 Hz applications.
GE’s 7HA high efficiency air-cooled gas turbine is one of the industry leaders among advanced class gas turbine offerings and is available in three models—the 7HA.01 at 290 MW, the 7HA.02 at 384 MW, and the 7HA.03 at 430 MW.
7HA gas turbines are up to 50% hydrogen (H2) capable with a technology pathway to 100%
The demands of today’s power generation industry are many: low cost of electricity, dispatch volatility, along with high efficiency, reliability, and asset availability. With approximately 950 installed units producing ~175GW of power in 11 countries, GE’s 7F.04 and 7F.05 gas turbines are proven performers in all these areas.
7F series gas turbines can balance renewables by load-following at 40 MW/min ramp rates while maintaining emissions compliance.
With unprecedented operational flexibility, robust engineering and long operation intervals, the GT13E2 can be used in many different applications—all while meeting a very broad range of environment and operating conditions.
GT13e2 gas turbines can run on up to 30% hydrogen fuel.
Formerly known as the Frame 9E, GE Gas Power’s 9E gas turbine can help decrease costs and increase revenue for your plant. From the desert to the tropics to the arctic, the rugged 9E.03 heavy-duty gas turbine provides essential power and performs in a vast number of duty cycles and applications. The 9E.04 gas turbine provides increased power and performance while maintaining the simplicity and operational strengths of the 9E.03.
9E series gas turbines can run on 52 types of fuel.
A single, economical solution for the dispatch needs of nearly every industry condition.
LMS100 gas turbines can start up in 8 minutes
The 7E.03 gas turbine is recognized as an industry leader for 60 Hz industrial power applications. Its robust architecture and operational flexibility make it well-suited for a variety of peaking, cyclic, and baseload operations. With state-of-the-art fuel handling equipment, multi-fuel combustion system options, and advanced gas path features, the 7E gas turbine can accommodate a full range of fuel alternatives while helping to deliver better efficiency and lower emissions than other technologies in its class.
7E series gas turbines can deliver 100% load in 10 minutes.
GE’s 6F gas turbines offer the superior performance, reliability, and flexibility typically associated with larger power plants. The 6F models, including the 6F.01 and the 6F.03 gas turbines, pack a lot of power into a small package, offering durability and flexibility for harsh, remote, or floating power environments. Whether it be for 50 or 60 Hz, the 6F gas turbines maintain best-in-class efficiency and exhaust energy for combined cycle and CHP performance. The 6F.01 and 6F.03 offer segment-leading approximately 32,000-hour combustion and hot gas path inspection intervals.
6F gas turbines offer fuel flexibility and hydrogen capability while maintaining the reliability you’ve come to depend on
A leader in the +40 MW space, the LM6000 has over 40 million operating hours and more than 1,300 units shipped.
LM6000 gas turbines can start up in 5 minutes
Its ability to operate in island mode, coupled with multiple decades of proven rugged performance, make the 6B.03 an excellent solution for remote installations and extreme operating conditions. The rugged, reliable 6B.03 heavy-duty gas turbine is a popular choice for refineries, natural gas liquefaction power, CHP applications, and industrial power.
6B gas turbines can operate on a wide range of non-standard gas or liquid fuels, including over 90% hydrogen
The LM2500 family of aeroderivative gas turbines boasts several times the operating experience of its competitors combined, and its flexibility and reliability are unsurpassed.
LM2500 gas turbines feature >99.8% availability
Introducing one of the world’s most modular, reliable, and experienced mobile gas turbines.
TM2500 gas turbines can be installed and commissioned in 11 days
Former names of GE 9E gas turbines: Frame 9E, 9E, 9E 3-Series, 9141(E), 9151(E), 9161(E), 9171(E), PG9141E, PG9151E, PG9161E, PG9171E, 9E PIP, 9E AGP, 9E Syngas, 9E BFG, MS9001(E)
GE Gas Power engineers cleaner, more accessible energy that communities depend on to power growth and prosperity.
See how GE Gas Power is helping to build a world that works.