Ginger slice crushing steps
 

Ginger-Slicing-Drying-Crushing Dried ginger is recommended to be sliced first, then dried, and then put into the grinder. The grinder is suitable for crushing a variety of food materials, white sugar and condiment materials. Can be crushed.

Description of Ginger Slice Crusher

The ginger slice crusher has the advantages of low crushing temperature, low noise, high efficiency, high crushing fineness, and the crushing fineness can reach 120 meshes, which is suitable for crushing dry and brittle materials such as chemical materials and Chinese herbal medicines. Three kinds of 10-120 mesh screens can be selected at will. Ginger slices have high fiber content. The crushing effect of this hammer-head crusher is very good. Our drivers are exported to Malaysia, Italy, Thailand, Vietnam, Singapore, etc.

Working principle of ginger slice crusher

The ginger slices are put into the crusher so that the crushed materials are in the crushing cavity and are collided, knocked, cut and rubbed by the hammer at high speed, as well as the collision and friction between the materials, so as to obtain crushing, and the crushed materials fall into the sieve. In the receiving bag below the crushing cavity. In addition, the machine is equipped with a cooling device. If the continuous crusher can be connected to a water pipe device, the temperature of the crushing chamber can be reduced.

Note: The water cooling device and the outer ring of the crushing chamber, as well as the crushing chamber door cover and the rear wall of the crushing chamber, are artificially set up with a dense cavity, and cold water is injected. Then it is discharged out of the cavity, so as to cool the whole pulverizer head and reduce the temperature of the pulverizing cavity.

3.Product Pictures






4.Company Certification



5.Our Customers


6.Contact Us