HTC high efficiency turbo classifier
1. No moving parts
2. multiple application no any influence
3. Good dust collection rate
Industrial cyclone are often employed as an Initial Stage Collector to lighten heavy dusts loads before being sent to a Primary Stage Fabric Collector. By removing coarse particles from the gas stream, and allowing later stage Fabric Collectors to solely remove finer particles, these collectors increase the efficiency and service life of Fabric Collectors (Baghouses) and their Filters. Thus protecting your larger and most costly investment from unnecessary wear and tear.
It often named after the cyclone weather phenomenon, are large funnel shaped sheet metal tubes connected to ducts often used in woodshops, machine shops, manufacturing plants, and powder processing plants. Dust and debris are sucked in at the top. Air containing fine dust blows out of the other side of the top, while chips and large dust particles fall out of the bottom into a drum or bin. Dusty exhaust air is either blown outside or filtered again using media filtration. Working principleAs the dirty air enters the cyclone dust collector, it is forced into a swirling movement. This results in a centrifugal force acting on the dust particles suspended in the air stream. The particles, denser than the air, are forced to move outwards, towards the cyclone dust collector wall. They then fall downwards, towards the dust exit. The clean air is eventually directed towards the centre of the cyclone and leaves through the gas exit.Cyclone dust collector efficiency is a function of the physical parameters of the particles and the design parameters of the unit. Cyclone efficiency increases with:
Coarse particle size distribution
Higher products specific gravity
Lower gas density
Smaller outlet diameter. An increase in pressure drop also results.
Characteristic The Cyclone dust collector hasn't any moving parts. It's conenient for manufacture and management. With the same air volume, The cyclone collector is more smaller size, and the price is more cheaper. As the second dedusting and matched with bag filter, it can be installed vertically, also can be installed in a horizontal. So, it is easy to install and applicate. The cyclone collector efficiency of resistance is not affected for many sets of cylcone dollector in multiple using when processing the large dust gas air volume.
Technical parameter
1. No moving parts
2. multiple application no any influence
3. Good dust collection rate
Industrial cyclone are often employed as an Initial Stage Collector to lighten heavy dusts loads before being sent to a Primary Stage Fabric Collector. By removing coarse particles from the gas stream, and allowing later stage Fabric Collectors to solely remove finer particles, these collectors increase the efficiency and service life of Fabric Collectors (Baghouses) and their Filters. Thus protecting your larger and most costly investment from unnecessary wear and tear.
It often named after the cyclone weather phenomenon, are large funnel shaped sheet metal tubes connected to ducts often used in woodshops, machine shops, manufacturing plants, and powder processing plants. Dust and debris are sucked in at the top. Air containing fine dust blows out of the other side of the top, while chips and large dust particles fall out of the bottom into a drum or bin. Dusty exhaust air is either blown outside or filtered again using media filtration. Working principleAs the dirty air enters the cyclone dust collector, it is forced into a swirling movement. This results in a centrifugal force acting on the dust particles suspended in the air stream. The particles, denser than the air, are forced to move outwards, towards the cyclone dust collector wall. They then fall downwards, towards the dust exit. The clean air is eventually directed towards the centre of the cyclone and leaves through the gas exit.Cyclone dust collector efficiency is a function of the physical parameters of the particles and the design parameters of the unit. Cyclone efficiency increases with:
Coarse particle size distribution
Higher products specific gravity
Lower gas density
Smaller outlet diameter. An increase in pressure drop also results.
Characteristic The Cyclone dust collector hasn't any moving parts. It's conenient for manufacture and management. With the same air volume, The cyclone collector is more smaller size, and the price is more cheaper. As the second dedusting and matched with bag filter, it can be installed vertically, also can be installed in a horizontal. So, it is easy to install and applicate. The cyclone collector efficiency of resistance is not affected for many sets of cylcone dollector in multiple using when processing the large dust gas air volume.
Technical parameter
Model | Rotor Diammm | Rotor speedr/min | Rotor powerkw | Air volume (m³/h) | Capacity (kg/h) | comminution sizeum |
HTG-132 | 132 | 1100~11000 | 4 | 500 | 15~300 | 3~150 |
HTG-250 | 250 | 700~7000 | 5.5~7.5 | 2000 | 30~800 | |
HTG-315 | 315 | 500~5000 | 7.5~11 | 3200 | 50~1500 | |
HTG-400 | 400 | 450~4500 | 11~15 | 5000 | 100~3000 | |
HTG-500 | 500 | 350~3500 | 22~30 | 7000 | 200~4500 | |
HTG-630 | 630 | 250~2500 | 30~37 | 9000 | 300~6000 | |
HTG-800 | 800 | 150~1500 | 37~45 | 12500 | 400~8000 |